PRODUCTS

+
  • 3-24.jpg
  • 3-25.jpg

KX-150SB Biomass Gasifier


key word:

Category:

Biomass gasifier

MESSAGES

Introduction to Biomass Gasifier:
  KX fluidized bed series biomass gasifier is composed of furnace system,dust removal system,cooling system,tar purification system,tar separation system,roots blower,electrical control system,etc.It is a downdraft fluidized bed gasification equipment that uses biomass energy such as crop straw,agricultural and forestry waste,industrial organic waste,urban organic solid waste to produce biomass gas.The equipment adopts the latest self-developed technical achievements to realize the intelligent control of the output gas volume of the biomass gasifier,automatic control of feeding and ash removal,and automatic discharge of sewage.The biomass gasifier can work continuously for a long time.The intelligent control of the output gas volume adapts to the needs of power generation fluctuations of power generation equipment,and can ensure the perfect and flexible cooperation between biomass gasification and the operation of power generation equipment.
  By controlling the reaction process,carbon,hydrogen,and oxygen are turned into combustible gases such as carbon monoxide,hydrogen and methane,and most of the energy in the biomass raw materials is transferred to the synthesis gas.This is biomass gasification.The gasification process of the furnace.
  The generation principle of biomass synthesis gas:biomass raw materials enter the reactor of the gasification furnace,after being heated and dried,and then as the temperature rises,its volatile matter is precipitated and pyrolyzed(cracked)at high temperature,the gas and carbon after pyrolysis In the oxidation zone,it reacts with the supplied air to produce CO2 and water vapor.The heat generated by the combustion is used to maintain drying,pyrolysis and endothermic reactions in the lower reduction zone.The gas produced after combustion passes through the reduction zone and reacts with the high-temperature carbon layer(C+CO2=2CO,C+HO2=H2+CO)to generate biomass synthesis gas containing CO,H2,CH4,CmHn,etc.,which is drawn from the bottom,After the purification system removes impurities such as tar,it is sent out for use.The ash is discharged from the lower part of the gasifier.

Device model

Gas production

Syngas heating value

Raw material consumption

Gasification efficiency

Voltage

Remarks

KX-150SA

150m3/h

1000-1200Kcal

75kg/h

>75%

380V 400V 410V 420V 50Hz/60Hz(customizable)

Please contact the sales staff for specific customization details

How we can help you?

SEND