The State Council: promote urban development of waste incineration power generation, promote rural development of biomass energy


The State Council recently issued the Guiding Opinions on Accelerating the Establishment and Improvement of a Green, Low-carbon and Circular Economic System (hereinafter referred to as the Guiding Opinions).
The Guiding Opinions suggest that establishing and improving the green, low-carbon and circular economic system and promoting the comprehensive green transformation of economic and social development are the fundamental solutions to China's resource, environmental and ecological problems.
"Guidance", by 2035, the green development of endogenous power significantly enhanced, green industry to a new level of scale, key industries, key energy resource utilization efficiency of products reach the international advanced level, extensive form of green production way of life, after stability of carbon emissions to peak, a fundamental improvement in the ecological environment, beautiful China construction target basic implementation.
The Guiding Opinions put forward relevant requirements for the development of biomass energy field:
1. Promoting green industrial upgrading.
We will build bases for comprehensive utilization of resources and promote comprehensive utilization of industrial solid waste.
(2) Accelerating green development of agriculture.
We will develop ecological recycling agriculture, improve the utilization of livestock and poultry waste as resources, and promote the comprehensive utilization of crop stalks.
(3) Promote green and low-carbon transformation of the energy system.
We will increase the proportion of renewable energy used and develop biomass energy in light of local conditions.
We will increase the supply of clean energy in rural areas and promote the development of biomass energy in rural areas.
In northern counties, we will actively develop clean central heating by cogeneration of heat and power, and steadily promote biomass coupled heating.
4. Promote the construction and upgrading of urban environmental infrastructure.
We will speed up the construction of facilities for treating urban household garbage, promote the incineration of household garbage for power generation, and reduce the number of domestic garbage disposed of in landfills.
The Guiding Opinions put forward the construction of green supply chain.
Industry associations are encouraged to improve the green level of industrial supply chains through the formulation of norms, consulting services, and industry self-discipline.

LAST NEWS


The generator set control module adopts the microprocessor-based

The generation principle of biomass synthesis gas: biomass raw materials enter the reactor of the gasification furnace, after being heated and dried, and then as the temperature rises, its volatile matter is precipitated and pyrolyzed (cracked) at high temperature. The pyrolyzed gas and production The substance undergoes a combustion reaction with the supplied air in the oxidation zone to produce CO2 and water vapor. The heat generated by combustion is used to maintain drying, pyrolysis and endothermic reactions in the lower reduction zone. The gas produced after combustion passes down the reduction zone and reacts with the high-temperature carbon layer (C+CO2=2CO, C+HO2=H2+CO) to generate biomass synthesis gas containing CO, H2, CH4, CmHn, etc. It is drawn from the bottom, and is sent out for use after the purification system removes impurities such as tar. The ash is discharged from the lower part of the gasifier. The generator set control module adopts the microprocessor-based generator set control technology, which has many functions such as automatic data recording, automatic operation, automatic control, automatic protection, etc., and has good reliability and stable performance. The operating parameters of the unit are displayed by a large-screen LCD, which displays large and accurate data.


which is convenient for transportation and installation

Biomass gasifier is composed of furnace body system, dust removal system, cooling system, tar purification system, tar separation system, Roots blower, electrical control system, etc. The syngas generator set is mainly composed of a gas engine, a three-phase AC synchronous engine, a control cabinet, a common chassis and a gas source link part. The KX series biomass synthesis gas power generation system adopts modular design, which is convenient for transportation and installation. The KX series biomass gasifier is a downdraft, fluidized bed biomass gasifier independently designed and developed for the needs of biomass synthesis gas power generation. This series of biomass gasifier uses PLC intelligent system control The system fully realizes long-term fully automatic work. And the dry purification technology used in the gasifier avoids secondary water pollution to the natural environment. Moreover, the raw materials are highly adaptable, requiring the size of the biomass raw materials to be ≤30mm and the moisture content ≤20%. Pass various biomass raw materials through the gasifier for drying, cracking, oxidation and reduction to produce biomass synthesis gas, and then the biomass synthesis gas is cooled, dusted, and cooled to remove tar and impurities in the gas, and the processed high-quality , The pure biomass synthesis gas is transported to the synthesis gas generator set for power generation. In this way, while realizing the conversion of low-value biomass energy from solid to gaseous, it greatly improves the utilization efficiency of solid biomass energy. Biomass gasification is the process of converting solid biomass (wood chips, branches, organic household waste, agricultural and forestry waste, etc.) into combustible biomass synthesis gas. By controlling the reaction process, carbon, hydrogen, and oxygen are chemically reacted. It is synthesized into combustible components such as carbon monoxide, hydrogen and methane, and most of the energy in biomass raw materials is transferred to biomass synthesis gas. This is the gasification process of biomass gasifier. The generation principle of biomass synthesis gas: biomass raw materials enter the reactor of the gasification furnace, after being heated and dried, and then as the temperature rises, its volatile matter is precipitated and pyrolyzed (cracked) at high temperature. The pyrolyzed gas and production The substance undergoes a combustion reaction with the supplied air in the oxidation zone to produce CO2 and water vapor. The heat generated by combustion is used to maintain drying, pyrolysis and endothermic reactions in the lower reduction zone. The gas produced after combustion passes down the reduction zone and reacts with the high-temperature carbon layer (C+CO2=2CO, C+HO2=H2+CO) to generate biomass synthesis gas containing CO, H2, CH4, CmHn, etc. It is drawn from the bottom, and is sent out for use after the purification system removes impurities such as tar. The ash is discharged from the lower part of the gasifier.    The generator set control module adopts the microprocessor-based generator set control technology, which has many functions such as automatic data recording, automatic operation, automatic control, automatic protection, etc., and has good reliability and stable performance. The operating parameters of the unit are displayed by a large-screen LCD, which displays large and accurate data.


Biomass gasification is the process of converting solid biomass

Biomass gasification is the process of converting solid biomass (wood chips, branches, organic household waste, agricultural and forestry waste, etc.) into combustible biomass synthesis gas. By controlling the reaction process, carbon, hydrogen, and oxygen are chemically reacted. It is synthesized into combustible components such as carbon monoxide, hydrogen and methane, and most of the energy in biomass raw materials is transferred to biomass synthesis gas. This is the gasification process of biomass gasifier. The generation principle of biomass synthesis gas: biomass raw materials enter the reactor of the gasification furnace, after being heated and dried, and then as the temperature rises, its volatile matter is precipitated and pyrolyzed (cracked) at high temperature. The pyrolyzed gas and production The substance undergoes a combustion reaction with the supplied air in the oxidation zone to produce CO2 and water vapor. The heat generated by combustion is used to maintain drying, pyrolysis and endothermic reactions in the lower reduction zone. The gas produced after combustion passes down the reduction zone and reacts with the high-temperature carbon layer (C+CO2=2CO, C+HO2=H2+CO) to generate biomass synthesis gas containing CO, H2, CH4, CmHn, etc. It is drawn from the bottom, and is sent out for use after the purification system removes impurities such as tar. The ash is discharged from the lower part of the gasifier.    The generator set control module adopts the microprocessor-based generator set control technology, which has many functions such as automatic data recording, automatic operation, automatic control, automatic protection, etc., and has good reliability and stable performance. The operating parameters of the unit are displayed by a large-screen LCD, which displays large and accurate data.