Shandong: by the end of July, installed biomass power generation ranked first in China


In shandong province on September 3 in the afternoon, the government information office held a press conference, conference, spokesman for the provincial government and provincial development and reform commission, provincial people club hall, the province ecological environment agency, comrade provincial communications department, provincial energy bureau responsible for interpretation of the "to carry out the" six steady "" six protect" promote the development of high quality policy list (the fourth batch of) "(hereinafter referred to as the list of the fourth batch of policy). Deng Zhaojun, deputy director general and second-level inspector of Shandong Provincial Energy Bureau, answered reporters' questions and introduced the key measures shandong province will take to implement the "six stable" and "six guarantees" and promote the high-quality development of new energy.

At the meeting, Deng Zhaojun, deputy director of the provincial Energy Bureau and second-level inspector, said that by the end of July, the installed capacity of new energy power generation in Shandong province reached 52.46 million kilowatts, of which photovoltaic and biomass power generation capacity ranked first in the country.

To meet general Secretary Xi Jinping's goal of installing more than 1.2 billion kilowatts of wind and solar power by 2030, Shandong province will implement the action of doubling renewable energy during the 14th Five-Year Plan period, focusing on key fields such as wind power and photovoltaic, and promoting large-scale and high-quality development of new energy. In the formulation process of the fourth batch of "policy packages", Shandong province invited relevant departments and bureaus to put forward a number of targeted policies and measures.

For example, in terms of nuclear energy heating, the first commercial demonstration project of nuclear energy heating in China was built based on the haiyang Nuclear Power Plant phase I project, providing clean heating with nuclear energy for 700,000 square meters of surrounding residents. Since its completion and operation, the two heating seasons have maintained safe, stable and efficient operation, achieving win-win results for all parties. At present, Shandong is speeding up the construction of the second phase of the project, and strive to complete the construction before the heating season this year, to achieve the "full coverage" of 4.5 million square meters of nuclear energy heating in Haiyang city, to create the first "zero carbon" heating city in China. This policy package thermal resources integration jiaodong peninsula region, in condition of using nuclear energy heating priority, reference is not higher than "coal to gas" and "coal to electricity" clean heating subsidies standards, in line with the local actual nuclear heating support policy, will help to further promote cross-regional nuclear heating application demonstration, We will promote the gradual implementation of nuclear clean heating in areas where conditions permit on the Jiaodong Peninsula.

Another example is the development and utilization of new energy resources in rural areas. In order to give full play to the advantages of early start, fast development and good grid access and consumption conditions of distributed photovoltaic in Shandong Province, according to the unified deployment of the state, counties with good basic conditions are selected to carry out large-scale development of distributed photovoltaic in the whole county. To this end, Shandong province has put forward supporting policies such as packaging and filing of pilot projects as a whole, opening up a "green channel" for power grid access, innovating the consumption mode, and increasing loan incentives to accelerate project construction and promote local consumption. And take this as an opportunity to study and formulate the "100 townships, 1000 Villages" green energy development action plan, through the overall planning of rural photovoltaic, biomass energy, geothermal energy and other renewable energy comprehensive development, integrated to solve the province's rural clean energy use problem. By 2025, the province will build about 100 demonstration towns and villages and about 1,000 demonstration villages.

In the next step, Shandong will continue to do a solid job in the "six stable" work and implement the "six guarantee" task. Centering on the implementation of relevant policies in the field of new energy, shandong will further refine the work measures, strengthen publicity and guidance, optimize the development environment, constantly reduce the cost of enterprises, and accelerate the construction of a clean, low-carbon, safe and efficient modern energy system. For our province to achieve "walk in the forefront, comprehensive creation" to provide a solid guarantee.

LAST NEWS


The generator set control module adopts the microprocessor-based

The generation principle of biomass synthesis gas: biomass raw materials enter the reactor of the gasification furnace, after being heated and dried, and then as the temperature rises, its volatile matter is precipitated and pyrolyzed (cracked) at high temperature. The pyrolyzed gas and production The substance undergoes a combustion reaction with the supplied air in the oxidation zone to produce CO2 and water vapor. The heat generated by combustion is used to maintain drying, pyrolysis and endothermic reactions in the lower reduction zone. The gas produced after combustion passes down the reduction zone and reacts with the high-temperature carbon layer (C+CO2=2CO, C+HO2=H2+CO) to generate biomass synthesis gas containing CO, H2, CH4, CmHn, etc. It is drawn from the bottom, and is sent out for use after the purification system removes impurities such as tar. The ash is discharged from the lower part of the gasifier. The generator set control module adopts the microprocessor-based generator set control technology, which has many functions such as automatic data recording, automatic operation, automatic control, automatic protection, etc., and has good reliability and stable performance. The operating parameters of the unit are displayed by a large-screen LCD, which displays large and accurate data.


which is convenient for transportation and installation

Biomass gasifier is composed of furnace body system, dust removal system, cooling system, tar purification system, tar separation system, Roots blower, electrical control system, etc. The syngas generator set is mainly composed of a gas engine, a three-phase AC synchronous engine, a control cabinet, a common chassis and a gas source link part. The KX series biomass synthesis gas power generation system adopts modular design, which is convenient for transportation and installation. The KX series biomass gasifier is a downdraft, fluidized bed biomass gasifier independently designed and developed for the needs of biomass synthesis gas power generation. This series of biomass gasifier uses PLC intelligent system control The system fully realizes long-term fully automatic work. And the dry purification technology used in the gasifier avoids secondary water pollution to the natural environment. Moreover, the raw materials are highly adaptable, requiring the size of the biomass raw materials to be ≤30mm and the moisture content ≤20%. Pass various biomass raw materials through the gasifier for drying, cracking, oxidation and reduction to produce biomass synthesis gas, and then the biomass synthesis gas is cooled, dusted, and cooled to remove tar and impurities in the gas, and the processed high-quality , The pure biomass synthesis gas is transported to the synthesis gas generator set for power generation. In this way, while realizing the conversion of low-value biomass energy from solid to gaseous, it greatly improves the utilization efficiency of solid biomass energy. Biomass gasification is the process of converting solid biomass (wood chips, branches, organic household waste, agricultural and forestry waste, etc.) into combustible biomass synthesis gas. By controlling the reaction process, carbon, hydrogen, and oxygen are chemically reacted. It is synthesized into combustible components such as carbon monoxide, hydrogen and methane, and most of the energy in biomass raw materials is transferred to biomass synthesis gas. This is the gasification process of biomass gasifier. The generation principle of biomass synthesis gas: biomass raw materials enter the reactor of the gasification furnace, after being heated and dried, and then as the temperature rises, its volatile matter is precipitated and pyrolyzed (cracked) at high temperature. The pyrolyzed gas and production The substance undergoes a combustion reaction with the supplied air in the oxidation zone to produce CO2 and water vapor. The heat generated by combustion is used to maintain drying, pyrolysis and endothermic reactions in the lower reduction zone. The gas produced after combustion passes down the reduction zone and reacts with the high-temperature carbon layer (C+CO2=2CO, C+HO2=H2+CO) to generate biomass synthesis gas containing CO, H2, CH4, CmHn, etc. It is drawn from the bottom, and is sent out for use after the purification system removes impurities such as tar. The ash is discharged from the lower part of the gasifier.    The generator set control module adopts the microprocessor-based generator set control technology, which has many functions such as automatic data recording, automatic operation, automatic control, automatic protection, etc., and has good reliability and stable performance. The operating parameters of the unit are displayed by a large-screen LCD, which displays large and accurate data.


Biomass gasification is the process of converting solid biomass

Biomass gasification is the process of converting solid biomass (wood chips, branches, organic household waste, agricultural and forestry waste, etc.) into combustible biomass synthesis gas. By controlling the reaction process, carbon, hydrogen, and oxygen are chemically reacted. It is synthesized into combustible components such as carbon monoxide, hydrogen and methane, and most of the energy in biomass raw materials is transferred to biomass synthesis gas. This is the gasification process of biomass gasifier. The generation principle of biomass synthesis gas: biomass raw materials enter the reactor of the gasification furnace, after being heated and dried, and then as the temperature rises, its volatile matter is precipitated and pyrolyzed (cracked) at high temperature. The pyrolyzed gas and production The substance undergoes a combustion reaction with the supplied air in the oxidation zone to produce CO2 and water vapor. The heat generated by combustion is used to maintain drying, pyrolysis and endothermic reactions in the lower reduction zone. The gas produced after combustion passes down the reduction zone and reacts with the high-temperature carbon layer (C+CO2=2CO, C+HO2=H2+CO) to generate biomass synthesis gas containing CO, H2, CH4, CmHn, etc. It is drawn from the bottom, and is sent out for use after the purification system removes impurities such as tar. The ash is discharged from the lower part of the gasifier.    The generator set control module adopts the microprocessor-based generator set control technology, which has many functions such as automatic data recording, automatic operation, automatic control, automatic protection, etc., and has good reliability and stable performance. The operating parameters of the unit are displayed by a large-screen LCD, which displays large and accurate data.